Plastics machine shop · Wauconda, Illinois847-260-8104
Material

Ultem (PEI) machining

PEI (polyetherimide; Ultem is the best-known resin brand) is a strong, stiff, amber-transparent plastic that stays rigid at elevated temperature and is a good electrical insulator. It sits between the commodity engineering plastics and PEEK in both performance and cost.

Upload a STEP or STL and the price shows in a few seconds; no account needed. Up to 100 pieces checks out by card. Above that a person quotes it within 24 hours. Questions: 847-260-8104 rings the shop.

What Ultem is used for

  • Electrical insulators and connector bodies
  • High-temperature fixtures and tooling
  • Manifolds and housings that need to stay rigid when warm
  • Parts that go through repeated cleaning or sterilization cycles

How it is priced here

  • CNC milling from plate and rod. Grades quoted online: Ultem 1000 — amber.
  • Not quoted online as routed sheet. Ask on a firm quote if you need flat parts from sheet.
  • Size limits and design rules are on the machining and routing pages.

Typical properties

PropertyPEI, unfilled
Density1.27 g/cm³
Tensile strength17,500 psi at break (ASTM D638)
Max service temperature (air)338 °F long term; 392 °F short term
Water absorption0.25% in 24 h; 1.25% at saturation (ASTM D570)
Coefficient of frictionNot listed on the datasheet
SourceEnsinger TECAPEI natural (datasheet values, retrieved 2026-11-09)

Typical values from the datasheet named above, for unfilled natural material at room temperature. They are not a specification. Grades, colors, fillers and stock makers differ, so confirm against the datasheet for the grade you will actually buy before designing to a number.

Wear and friction

Not a bearing material. Unfilled PEI has poor wear resistance in sliding contact; the datasheet above does not list a friction coefficient.

Food contact

Specific PEI grades are sold with food-contact documentation. Check the grade; do not assume it from the polymer name.

Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to. More on food-contact plastics.

Machining notes

  • Machines cleanly and holds size well.
  • It is notch-sensitive and can stress-crack. Inside corners need a radius, and cutting fluids and cleaners have to be compatible; some solvents craze it.
  • Extruded stock carries internal stress. Thick sections with heavy material removal benefit from roughing and resting before the finish pass.
  • Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order.

Common questions

What forms of Ultem do you quote online?
CNC milling from plate and rod. Other sizes and grades can be requested on a firm quote.
What tolerance is realistic on Ultem?
PEI is rigid and dimensionally stable. Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order. Tighter requirements are reviewed on a firm quote with the drawing.
Is Ultem suitable for food contact?
Specific PEI grades are sold with food-contact documentation. Check the grade; do not assume it from the polymer name. Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to.
How do I get a price for a part in Ultem?
Upload a STEP or STL file to the quote builder and choose Ultem (PEI). Quantities up to 100 pieces are priced online; larger quantities and parts that need review get a firm quote from a person within 24 hours.

Price your Ultem part now

Upload a STEP or STL with Ultem (PEI) already selected. No account needed to see a price.

Other materials