Polycarbonate machining and routing
Polycarbonate (PC) is a clear, very impact-resistant plastic. It is the usual choice for guards and windows that must not shatter, and it machines into housings and covers. It scratches more easily than acrylic and is attacked by some solvents and cleaners.
Upload a STEP or STL and the price shows in a few seconds; no account needed. Up to 100 pieces checks out by card. Above that a person quotes it within 24 hours. Questions: 847-260-8104 rings the shop.
What polycarbonate is used for
- Machine guards and safety shields
- Sight windows and inspection covers
- Housings, enclosures and manifolds you need to see into
- Electrical covers and insulating barriers
How it is priced here
- CNC milling from plate and rod. Grades quoted online: Polycarbonate — clear; Polycarbonate — black.
- CNC routing from sheet, 1/16" to 1/2" thick (1/16", 1/8", 3/16", 1/4", 3/8", 1/2"). Sheet grades quoted online: Polycarbonate — clear; Polycarbonate — bronze/tinted.
- Size limits and design rules are on the machining and routing pages.
Typical properties
| Property | Polycarbonate, unfilled |
|---|---|
| Density | 1.19 g/cm³ |
| Tensile strength | 9,300 psi at yield (ASTM D638) |
| Max service temperature (air) | 250 °F long term; 275 °F intermittent |
| Water absorption | 0.07% in 24 h; 0.35% at saturation (ASTM D570) |
| Coefficient of friction | 0.38 dynamic (ASTM D3702) |
| Source | Ensinger TECANAT natural (datasheet values, retrieved 2026-11-09) |
Typical values from the datasheet named above, for unfilled natural material at room temperature. They are not a specification. Grades, colors, fillers and stock makers differ, so confirm against the datasheet for the grade you will actually buy before designing to a number.
Wear and friction
Not a bearing material: friction is high for a plastic and the surface scratches. Hard-coated sheet is sold for abrasion resistance on windows.
Food contact
Some polycarbonate grades are sold with food-contact statements. Check the specific sheet or rod product.
Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to. More on food-contact plastics.
Machining notes
- Machines and routes well with sharp tools. Machined faces come off the cutter frosted, not clear; optical clarity on a cut face takes polishing as a separate step.
- It is sensitive to stress cracking. Some coolants, thread lockers, cleaners and solvents will craze it, especially around stressed holes and tight fasteners.
- Thick machined parts hold internal stress; stress-relieving before polishing or solvent exposure reduces cracking.
- Use generous inside radii and avoid sharp-rooted threads in highly loaded areas.
- Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order.
Common questions
- What forms of polycarbonate do you quote online?
- CNC milling from plate and rod, and CNC routing from sheet 1/16" to 1/2" thick. Sheet thicknesses quoted online: 1/16", 1/8", 3/16", 1/4", 3/8", 1/2". Other sizes and grades can be requested on a firm quote.
- What tolerance is realistic on polycarbonate?
- Polycarbonate is rigid and holds size well. Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order. Tighter requirements are reviewed on a firm quote with the drawing.
- Is polycarbonate suitable for food contact?
- Some polycarbonate grades are sold with food-contact statements. Check the specific sheet or rod product. Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to.
- How do I get a price for a part in polycarbonate?
- Upload a STEP or STL file to the quote builder and choose Polycarbonate. Quantities up to 100 pieces are priced online; larger quantities and parts that need review get a firm quote from a person within 24 hours.
Price your polycarbonate part now
Upload a STEP or STL with Polycarbonate already selected. No account needed to see a price.