Plastics machine shop · Wauconda, Illinois847-260-8104
Material

Polypropylene machining and routing

Polypropylene (PP) is a light, low-cost plastic with very good resistance to acids, bases and many solvents. It can be welded, absorbs almost no water and is lighter than water. It is flexible and not a precision material.

Upload a STEP or STL and the price shows in a few seconds; no account needed. Up to 100 pieces checks out by card. Above that a person quotes it within 24 hours. Questions: 847-260-8104 rings the shop.

What polypropylene is used for

  • Tank parts, covers and trays in chemical service
  • Plating-line and lab fixtures
  • Cutting and work surfaces
  • Spacers and low-load parts in wet areas

How it is priced here

  • CNC milling from plate and rod. Grades quoted online: Polypropylene homopolymer — natural.
  • CNC routing from sheet, 1/16" to 1" thick (1/16", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1"). Sheet grades quoted online: Polypropylene — natural.
  • Size limits and design rules are on the machining and routing pages.

Typical properties

PropertyPolypropylene homopolymer
Density0.91 g/cm³ (ASTM D792)
Tensile strength4,700 psi at yield (ASTM D638)
Max service temperature (air)180 °F maximum in air
Water absorptionunder 0.10% (ASTM D570)
Coefficient of friction0.25 to 0.28 dynamic
SourceRöchling Polystone P homopolymer natural (ASTM sheet) (datasheet values, retrieved 2026-11-09)

Typical values from the datasheet named above, for unfilled natural material at room temperature. They are not a specification. Grades, colors, fillers and stock makers differ, so confirm against the datasheet for the grade you will actually buy before designing to a number.

Wear and friction

Moderate. It slides acceptably but wears faster than UHMW or acetal in abrasive contact.

Food contact

Natural polypropylene homopolymer sheet is commonly sold with FDA food-contact statements (the datasheet cited above lists FDA compliance for its product). Check the specific sheet.

Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to. More on food-contact plastics.

Machining notes

  • Cuts easily but is soft and gummy. It burrs, and it pushes away from the cutter on thin sections.
  • High thermal expansion and residual stress in sheet mean flat parts can warp when material is removed unevenly. Balanced cuts and modest flatness callouts help.
  • It becomes brittle in the cold and is notch-sensitive there; radius inside corners.
  • It cannot be glued with ordinary adhesives. Join by welding or with fasteners.
  • Realistic tolerances are looser than for acetal. If a dimension is critical, call it out so it is reviewed before the job is quoted.

Common questions

What forms of polypropylene do you quote online?
CNC milling from plate and rod, and CNC routing from sheet 1/16" to 1" thick. Sheet thicknesses quoted online: 1/16", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1". Other sizes and grades can be requested on a firm quote.
What tolerance is realistic on polypropylene?
Polypropylene is soft and moves with temperature, so it is not a precision material. Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order.
Is polypropylene suitable for food contact?
Natural polypropylene homopolymer sheet is commonly sold with FDA food-contact statements (the datasheet cited above lists FDA compliance for its product). Check the specific sheet. Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to.
How do I get a price for a part in polypropylene?
Upload a STEP or STL file to the quote builder and choose Polypropylene. Quantities up to 100 pieces are priced online; larger quantities and parts that need review get a firm quote from a person within 24 hours.

Price your polypropylene part now

Upload a STEP or STL with Polypropylene already selected. No account needed to see a price.

Other materials