Plastics machine shop · Wauconda, Illinois847-260-8104
Material

PEEK machining

PEEK (polyetheretherketone) is a high-performance thermoplastic that keeps its strength at temperatures where most plastics have softened. It resists most chemicals, absorbs very little water and wears well. The stock is expensive, so it is used where a cheaper plastic will not survive.

Upload a STEP or STL and the price shows in a few seconds; no account needed. Up to 100 pieces checks out by card. Above that a person quotes it within 24 hours. Questions: 847-260-8104 rings the shop.

What PEEK is used for

  • Seals, seats and back-up rings
  • Bushings and bearings in hot or chemical service
  • Pump, valve and compressor components
  • Electrical insulators and connector bodies
  • Fixtures for hot or chemically aggressive processes

How it is priced here

  • CNC milling from plate and rod. Grades quoted online: PEEK — natural (unfilled).
  • Not quoted online as routed sheet. Ask on a firm quote if you need flat parts from sheet.
  • Size limits and design rules are on the machining and routing pages.

Typical properties

PropertyPEEK, unfilled
Density1.31 g/cm³
Tensile strength16,000 psi at yield (ASTM D638)
Max service temperature (air)480 °F long term; 572 °F short term
Water absorption0.03% in 24 h; 0.45% at saturation
Coefficient of friction0.20 to 0.25 (ASTM D3702)
SourceEnsinger TECAPEEK natural (datasheet values, retrieved 2026-11-09)

Typical values from the datasheet named above, for unfilled natural material at room temperature. They are not a specification. Grades, colors, fillers and stock makers differ, so confirm against the datasheet for the grade you will actually buy before designing to a number.

Wear and friction

Good wear resistance unfilled; bearing grades with carbon fiber, graphite and PTFE are sold for higher loads and speeds.

Food contact

Stock manufacturers offer specific PEEK grades with food-contact and medical documentation. Those are particular products with their own paperwork, not a property of PEEK in general.

Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to. More on food-contact plastics.

Machining notes

  • Machines to a good finish and holds dimensions well, closer to a soft metal than to most plastics.
  • Extruded rod and plate carry internal stress. Stock is normally supplied annealed; for parts with heavy material removal or thin sections, roughing, resting and then finishing reduces movement.
  • It is notch-sensitive compared with nylon. Inside corners should carry a radius, and thin features should not be designed with sharp roots.
  • Material is most of the price. A drawing that lets the stock be sized closely, or a design that nests in standard rod or plate sizes, makes a real difference.
  • Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order.

Common questions

What forms of PEEK do you quote online?
CNC milling from plate and rod. Other sizes and grades can be requested on a firm quote.
What tolerance is realistic on PEEK?
PEEK is stable and holds dimensions well for a plastic. Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order. Tighter requirements are reviewed on a firm quote with the drawing.
Is PEEK suitable for food contact?
Stock manufacturers offer specific PEEK grades with food-contact and medical documentation. Those are particular products with their own paperwork, not a property of PEEK in general. Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to.
How do I get a price for a part in PEEK?
Upload a STEP or STL file to the quote builder and choose PEEK. Quantities up to 100 pieces are priced online; larger quantities and parts that need review get a firm quote from a person within 24 hours.

Price your PEEK part now

Upload a STEP or STL with PEEK already selected. No account needed to see a price.

Other materials