Cast acrylic machining and routing
Acrylic (PMMA) is a rigid, optically clear plastic with good scratch and weather resistance. Cast sheet is the grade used for machining because it cuts cleanly and carries less internal stress than extruded sheet. It is brittle compared with polycarbonate.
Upload a STEP or STL and the price shows in a few seconds; no account needed. Up to 100 pieces checks out by card. Above that a person quotes it within 24 hours. Questions: 847-260-8104 rings the shop.
What acrylic is used for
- Windows, sight panels and covers
- Displays and signage
- Light guides and lenses
- Cosmetic covers and nameplates
How it is priced here
- CNC milling from plate and rod. Grades quoted online: Cast acrylic — clear.
- CNC routing from sheet, 1/16" to 1" thick (1/16", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1"). Sheet grades quoted online: Cast acrylic — clear; Cast acrylic — color.
- Size limits and design rules are on the machining and routing pages.
Typical properties
| Property | Cast acrylic sheet |
|---|---|
| Density | 1.19 (specific gravity, ASTM D792) |
| Tensile strength | 10,000 psi (ASTM D638) |
| Max service temperature (air) | 180 °F maximum recommended continuous service |
| Water absorption | 0.2% in 24 h (ASTM D570) |
| Coefficient of friction | Not listed on the datasheet |
| Source | CYRO Industries ACRYLITE GP acrylic sheet (datasheet values, retrieved 2026-11-09) |
Typical values from the datasheet named above, for unfilled natural material at room temperature. They are not a specification. Grades, colors, fillers and stock makers differ, so confirm against the datasheet for the grade you will actually buy before designing to a number.
Wear and friction
Harder and more scratch-resistant than polycarbonate, but not a wear or bearing material. The datasheet above does not list a friction coefficient.
Food contact
Some acrylic sheet products are sold with food-contact statements. Check the specific sheet product.
Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to. More on food-contact plastics.
Machining notes
- Cast acrylic machines and routes to a clean, matte edge. A cut edge is not clear until it is polished.
- It is brittle and notch-sensitive. Inside corners need a radius, holes should sit well in from an edge, and fasteners should not be over-tightened.
- Heat from cutting and some solvents and cleaners can craze the surface, sometimes days later. Annealing after heavy machining reduces that risk.
- Thickness tolerance of cast sheet is wide. If the thickness matters, it has to be machined, not taken from the sheet.
- Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order.
Common questions
- What forms of acrylic do you quote online?
- CNC milling from plate and rod, and CNC routing from sheet 1/16" to 1" thick. Sheet thicknesses quoted online: 1/16", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1". Other sizes and grades can be requested on a firm quote.
- What tolerance is realistic on acrylic?
- Acrylic is rigid and machines to size well, but cast sheet thickness varies as supplied. Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order. If the thickness is critical, say so, because it then has to be machined.
- Is acrylic suitable for food contact?
- Some acrylic sheet products are sold with food-contact statements. Check the specific sheet product. Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to.
- How do I get a price for a part in acrylic?
- Upload a STEP or STL file to the quote builder and choose Cast acrylic (PMMA). Quantities up to 100 pieces are priced online; larger quantities and parts that need review get a firm quote from a person within 24 hours.
Price your acrylic part now
Upload a STEP or STL with Cast acrylic (PMMA) already selected. No account needed to see a price.