Plastics machine shop · Wauconda, Illinois847-260-8104
Material

PVC machining and routing

Rigid PVC (Type 1, usually gray) is a stiff, inexpensive plastic with broad chemical resistance. It can be solvent-cemented and welded, which makes it common in tanks, plating lines and fluid handling. Its temperature limit is low.

Upload a STEP or STL and the price shows in a few seconds; no account needed. Up to 100 pieces checks out by card. Above that a person quotes it within 24 hours. Questions: 847-260-8104 rings the shop.

What PVC is used for

  • Chemical tank parts, covers and baffles
  • Manifolds, valve bodies and fluid fittings
  • Plating and wash-line fixtures
  • Panels, spacers and electrical barriers

How it is priced here

  • CNC milling from plate and rod. Grades quoted online: PVC Type 1 — gray.
  • CNC routing from sheet, 1/16" to 1" thick (1/16", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1"). Sheet grades quoted online: PVC Type 1 — gray; Expanded PVC (Sintra-type) — white.
  • Size limits and design rules are on the machining and routing pages.

Typical properties

PropertyPVC Type 1
Density1.42 g/cm³ (ASTM D792)
Tensile strength7,500 psi at yield
Max service temperature (air)Not listed. Heat deflection temperature is 176 °F at 264 psi (ASTM D648).
Water absorption0.06% (ASTM D570)
Coefficient of frictionNot listed on the datasheet
SourceVycom Vintec I PVC (datasheet values, retrieved 2026-11-09)

Typical values from the datasheet named above, for unfilled natural material at room temperature. They are not a specification. Grades, colors, fillers and stock makers differ, so confirm against the datasheet for the grade you will actually buy before designing to a number.

Wear and friction

Not a wear material. The datasheet above does not list a friction coefficient.

Food contact

Standard gray Type 1 PVC is an industrial grade. Food and potable-water use requires a specific listed product; do not assume it.

Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to. More on food-contact plastics.

Machining notes

  • Machines easily to a good finish and holds size reasonably well.
  • It softens at a low temperature. Sharp tools and good chip clearance keep the cut from heating and smearing.
  • Overheating PVC releases corrosive fumes, so it is cut conservatively and never laser-cut.
  • It is more brittle than polyethylene or nylon, especially when cold. Avoid sharp inside corners and thin unsupported tabs.
  • Expanded (foamed) PVC sheet is a different material: light, soft and intended for panels and signage, not for load.
  • Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order.

Common questions

What forms of PVC do you quote online?
CNC milling from plate and rod, and CNC routing from sheet 1/16" to 1" thick. Sheet thicknesses quoted online: 1/16", 1/8", 3/16", 1/4", 3/8", 1/2", 3/4", 1". Other sizes and grades can be requested on a firm quote.
What tolerance is realistic on PVC?
Rigid PVC machines to size reasonably well. Call out the dimensions that matter on a firm-quote request, and the tolerance for them is agreed before you order. Tighter requirements are reviewed on a firm quote with the drawing.
Is PVC suitable for food contact?
Standard gray Type 1 PVC is an industrial grade. Food and potable-water use requires a specific listed product; do not assume it. Food-contact status belongs to a specific grade, color and lot from the stock manufacturer, not to the polymer family. If your part touches food or drinking water, say so on the quote request and name the regulation your customer cites. You will be told before you order what paperwork can be had for that stock. A machine shop cannot certify a finished part for food contact, and this one does not claim to.
How do I get a price for a part in PVC?
Upload a STEP or STL file to the quote builder and choose PVC Type 1. Quantities up to 100 pieces are priced online; larger quantities and parts that need review get a firm quote from a person within 24 hours.

Price your PVC part now

Upload a STEP or STL with PVC Type 1 already selected. No account needed to see a price.

Other materials